CT4-LX Searching from an Image of the Product Miho Miyazato 06 January 2025 02:48 Updated Applicable models: CT4-LX Please refer to the below. (1) Nothing on the Screen Cannot Communicate via NFC Want to Change the Display Language When an Error Message Appears The Display Does Not Respond Correctly When Touched The Display is Too Dark/Bright (2) The LED Lights Red (3) No Power (4) Want to Use Without Cutting Even If the Cutter Unit Is Installed Media Does Not Feed Media Is Fed According to the Specified Number, but Not Printed The Label Does Not Stop at the Specified Position/The Label Does Not Stop The Print Position Is Shifted Vertically from the Media Feed Direction The Print Position Is Shifted Horizontally from the Media Feed Direction Print Stop Position and Cut Position Are Shifted The Media Is Not Cut The Media Has Jammed The Label Is Printed Even If the Previous Label Is Not Dispensed The Label Is Not Printed Even If the Previous Label Is Dispensed The Label Falls at the Dispenser Stop Position The Label Is Not Dispensed After Stopping at the Dispenser Stop Position (5) How to Load Ribbons (6) The USB Memory Is Not Recognized (7) How to Load Labels (8) Cannot Communicate via LAN Cannot Communicate via USB Cannot Communicate via RS-232C Cannot Communicate via Wireless LAN Cannot Communicate via Bluetooth The USB Memory Is Not Recognized [02-00141-EN]
