Skip to main content
Deutsch Español Français Bahasa Indonesia Italiano Nederlands Polski Português do Brasil ไทย Türkçe Tiếng Việt 简体中文

CL-NX Conditions That Trigger Paper End

Miho
Updated

Applicable models: CL4NX/6NX 
Please refer to the below.

 

The conditions that trigger paper end vary depending on the operation of the product.
Conditions That Trigger Paper End in the Feeding Operation
A paper-end occurs if the no-paper condition persists even after the paper-end sensor detects the no-paper condition when 15 mm (0.59") continues to be fed.
(1) Print head position
(2) Paper end sensor: I-mark sensor/Gap sensor
Select in [Printing] > [Advanced] > [Paper End] menu, or specify by command.
(3) Media feed direction
Conditions That Trigger Paper End in the Printing Operation
1.
The paper end sensor detects a no-paper condition at the position where 15 mm (0.59") has been fed.
2.
If the amount of printing remaining is less than the distance between the print head position and paper end sensor -15 mm (-0.59"), a paper end error occurs after completing the output of 1.
If the amount of printing remaining is more than the distance between the print head position and paper end sensor -15 mm (-0.59"), a paper end error occurs right after detecting the paper end, and the product will reprint after clearing the paper end error.
(1) Print head position
(2) Paper end sensor: I-mark sensor/Gap sensor
Select in [Printing] > [Advanced] > [Paper End] menu, or specify by command.
(3) Media feed direction
If a paper end error is detected while printing, operation varies depending on the amounts of printing and media remaining when the error was detected.
The amount of media remaining can be calculated as follows:
Amount of media remaining = distance between print head position and paper end sensor -15 mm (-0.59")
(1) Print head position
(2) Distance between the print head position and paper end sensor
(3) Paper end sensor
(4) Amount of media remaining
•
When the Amount of Printing Remaining Is More Than the Amount of Media Remaining
If the amount of printing remaining is more than the amount of media remaining when a paper end error is detected, the product cannot finish the print job. Printing stops immediately and a paper end error occurs.
(1) Print head position
(2) Paper end sensor
(3) Amount of media remaining
(4) Amount of printing remaining
•
When the Amount of Printing Remaining Is Less Than the Amount of Media Remaining
If the amount of printing remaining is less than the amount of media remaining, the product will finish the print job and a paper end error will occur.
(1) Print head position
(2) Paper end sensor
(3) Amount of media remaining
(4) Amount of printing remaining
If there are multiple sheets between the print head and paper end sensor when a paper end error is detected, a paper end error will occur only after finishing the label currently being printed.
(1) Print head position
(2) Paper end sensor
(3) Amount of media remaining
(4) Amount of printing remaining
[01-02184-EN]