CL-NX Adjusting the Media Stop Position Miho 27 May 2025 00:22 Updated Set the[Offset]in the[Printing]>[Advanced]>[Adjustments]menu to adjust the media stop position. • The above cut reference position for printing indicates the stop position when the media sensor type is set to Gap. • You can also adjust when the operation mode is specified to Tear-off or Dispenser. 1. When the product is in Online mode, press thebutton on the operator panel to change to Offline mode. 2. Press thebutton to show the[Settings]menu. 3. Select[Printing]using the/buttons, and then press thebutton. 4. Select the[Advanced]>[Adjustments]>[Offset]menu using the/buttons, and then press thebutton. The[Offset]screen appears. 5. Change the setting value. Press the///buttons to select a number and then press thebutton to enter the number to the text box. The setting range is as follows: Resolution CL4NX CL6NX 203 dpi (1 dot = 0.125 mm (0.0049")) -30 to +30 dots -30 to +30 dots 305 dpi (1 dot = 0.083 mm (0.0033")) -45 to +45 dots -45 to +45 dots 609 dpi (1 dot = 0.042 mm (0.0017")) -90 to +90 dots - 6. Press thebutton to save the setting value. 7. Press thebutton to change to Offline mode. 8. Press thebutton again to change to Online mode. You can print to check the adjusted stop position. [02-01540-EN]
button on the operator panel to change to Offline mode.
button to show the
/
buttons, and then press the
/
buttons, and then press the
button to save the setting value.