CL-NX RFID Write with Cutter Mode and Backfeed Before Printing (Tag Offset > 0, Feed Action) (CL4NX Only)

When cutter mode with backfeed before printing is selected, the tag backfeeds before printing, and stops at the cut position after printing. When [Feed Action] is selected in [Interface] > [RFID] > [Tag Offset] > [Encoding Action], this operation will be performed.

*1 Because the EPC code read and RFID read [DC2]PJ commands acquire the information at this inlay position, do not use them.

*2 Because the EPC code read and UID/EPC/IDm print <TU> commands acquire the information at this inlay position, do not use them if the Tag Offset is set to other than an initial value.

*3 The EPC code write <IP0> command and RFID write <RK> command write the data at this inlay position. The EPC code read, and UID/EPC/IDm return <RU> commands acquire the information at this inlay position.