CL-NX Filter Function

Miho

16 May 2026 09:55 Updated

Set the filter function by RSSI (Received Signal Strength Indication). If the RSSI value read while printing an RFID tag is lower than the specified threshold value, an RFID tag error occurs. An error message is printed on the inlay/RFID tag that caused the error.

Appears only if the installed module is UHF.

The setting items are as follows:

RSSI Filter

Enable or disable the RSSI filter function.

Threshold Value

Set the threshold value for the RSSI filter.

◦	Appears only if[Enabled]is selected in the[RSSI Filter]menu.

[02-01496-EN]