Applicable models: CL4NX/6NX
Please refer to the below.
Check if the wireless LAN antenna (1) is attached to the product.
The printer driver performs data communication using the dedicated SOCKET interfaces.
The communication condition settings must be configured according to your network environment. Set the IP address of the product.
The IP address of the product can be set through the product's[Interface]menu or the All-In-One Tool.
|
|
|
•
|
To use the printer driver, the communication protocol must be set to Status4. (The initial value of the communication protocol for the product's wireless LAN interface isStatus4 ENQ.)
|
|
•
|
The product does not support Atheros, SuperG, or XR functions.
|
|
[02-01559-EN]
