CL-NX Operations in Cutter Mode Miho 16 May 2026 09:54 Updated Applicable models: CL4NX/6NXPlease refer to the below. Cutter Mode, No Backfeed, and Without Pulse Input (Head Check Disabled) Cutter Mode, No Backfeed, and Without Pulse Input (Head Check Enabled) Cutter Mode, Backfeed After Printing, and Without Pulse Input (Head Check Disabled) Cutter Mode, Backfeed After Printing, and Without Pulse Input (Head Check Enabled) Cutter Mode, Backfeed Before Printing, and Without Pulse Input (Head Check Disabled) Cutter Mode, Backfeed Before Printing, and Without Pulse Input (Head Check Enabled) Cut & Print Mode Without Pulse Input (Head Check Disabled) Cut & Print Mode Without Pulse Input (Head Check Enabled) Cutter Mode, No Backfeed, and with Pulse Input (Head Check Disabled) Cutter Mode, No Backfeed, and with Pulse Input (Head Check Enabled) Cutter Mode, Backfeed After Printing, and with Pulse Input (Head Check Disabled) Cutter Mode, Backfeed After Printing, and with Pulse Input (Head Check Enabled) Cutter Mode, Backfeed Before Printing, and with Pulse Input (Head Check Disabled) Cutter Mode, Backfeed Before Printing, and with Pulse Input (Head Check Enabled) [02-01670-EN]
