CL-NX Loading the Saved RFID Tag Model – SATO Help Center

Applicable models: CL4/6NX

By saving SATO RF Analyze results as RFID tag models for each RFID tag you are using, you can easily change the product's settings when you switch RFID tags.

RFID tag models can be selected from the [Interface] > [RFID] > [RFID Tag Model] > [Load] menu and applied to the product.

The procedure to load the RFID tag model is as follows:

When the product is in Online mode, press the

button on the operator panel to change to Offline mode.

Press the

button to show the [Settings] menu.

Press the

buttons to select [Interface], and then press the

button.

Press the

buttons to select [RFID] > [RFID Tag Model], and then press the

button.

Press the

buttons to select [Load], and then press the

button.

Press the

buttons to select the RFID tag model to load.

Press the

button or

button to confirm.

Press the

button on the confirmation screen.

Press the

button on the completion screen.

The settings loaded from the RFID tag model are applied to the product. The name of the loaded RFID tag model appears on the right side of [Load] on the [RFID Tag Model] menu.

• From the [RFID Tag Model] > [Edit] menu, you can change settings in registered RFID tag models or manually register new RFID tag models.

[02-02312-EN]