Approximately 15.1 kg (33.28 lbs.) (Excludes media, ribbon and options)
Approximately 20.3 kg (44.75 lbs.) (Excludes media, ribbon and options)
Power Supply
Item
CL4NX
CL6NX
Input Voltage
AC 100 - 240 V ±10% (Full-range)
Frequency
50 / 60 Hz
Power Consumption
At peak
180 W / 190 VA (Print ratio 30%)
Standby
20 W / 40 VA
At peak
240 W / 308 VA (Print ratio 30%)
Standby
23 W / 63 VA
Processing
Item
CL4NX
CL6NX
Flash ROM
CPU1
2 GB
CPU2
4 MB
SDRAM
CPU1
256 MB
CPU2
64 MB
User Registration Area
Maximum 679 MB
Receive Buffer
Buffer full
2.95 MB
Buffer near full
Occurrence: 2MB, Release: 1 MB
Operation
Item
CL4NX
CL6NX
LCD
TFT color 3.5-inch (88.9 mm)
LED
STATUS
Blue/Red
Display Language
English / German / French / Spanish / Italian / Portuguese / Brazilian Portuguese / Czech / Danish / Dutch / Finnish / Greek / Hungarian / Norwegian / Polish / Romanian / Russian / Slovak / Swedish / Turkish / Chinese (Simplified) / Chinese (Traditional) / Korean / Japanese / Arabic / Thai / Vietnamese / Persian / Indonesian / Hindi / Bulgarian
Environmental Conditions (Without Media and Ribbon)
Item
CL4NX
CL6NX
Operating Temperature
Continuous/Cutter/Tear-off mode
0 to 40 °C (32 to 104 °F)
Dispenser/Linerless mode
5 to 35 °C (41 to 95 °F)
Continuous/Cutter/Tear-off mode
0 to 40 °C (32 to 104 °F)
Dispenser mode
5 to 35 °C (41 to 95 °F)
Storage Temperature
-20 to 60 °C (-4 to 140 °F)
Operating Humidity
Continuous/Dispenser/Cutter/Tear-off mode
30 to 80% RH (Non-condensing)
Linerless mode
30 to 75% RH (Non-condensing)
30 to 80% RH (Non-condensing)
Storage Humidity
30 to 90% RH (Non-condensing)
Print
Item
CL4NX
CL6NX
Print Method
Direct thermal and thermal transfer
Print Speed
203 dpi
2 to 10 inches/sec (50.8 to 254 mm/sec)
305 dpi
2 to 8 inches/sec (50.8 to 203.2 mm/sec)
609 dpi
2 to 6 inches/sec (50.8 to 152.4 mm/sec)
Linerless mode
2 to 6 inches/sec (50.8 to 152.4 mm/sec)
203 dpi
2 to 10 inches/sec (50.8 to 254 mm/sec)
305 dpi
2 to 8 inches/sec (50.8 to 203.2 mm/sec)
Resolution (Head Density)
•
203 dpi (8 dots/mm)
•
305 dpi (12 dots/mm)
•
609 dpi (24 dots/mm)
•
203 dpi (8 dots/mm)
•
305 dpi (12 dots/mm)
Non-printable Area
Pitch direction (Excludes liner)
Top
1.5 mm (0.06")
Bottom
1.5 mm (0.06")
Width direction (Excludes liner)
Left
1.5 mm (0.06")
Right
1.5 mm (0.06")
Printable Area
203 dpi
Length 2500 mm (98.42")
x Width 104 mm (4.09")
305 dpi
Length 1500 mm (59.05")
x Width 104 mm (4.09")
609 dpi
Length 400 mm (15.75")
x Width 104 mm (4.09")
203 dpi
Length 2500 mm (98.42")
x Width 152 mm (5.98")
305 dpi
Length 1500 mm (59.05")
x Width 165.3 mm (6.50")
When Head Base Position is set to Left-justify
maximum print width
167.5 mm (6.59")
Print End Position
203 dpi (1 dot = 0.125 mm (0.0049"))
1 to 20000 dots
305 dpi (1 dot = 0.083 mm (0.0033"))
1 to 18000 dots
609 dpi (1 dot = 0.042 mm (0.0017"))
1 to 9600 dots
203 dpi (1 dot = 0.125 mm (0.0049"))
1 to 20000 dots
305 dpi (1 dot = 0.083 mm (0.0033"))
1 to 18000 dots
Print Darkness
Darkness level
1 to 10
Darkness range
A
Sensors
Item
CL4NX
CL6NX
I-mark (Reflective Type)
Position and sensitivity
Adjustable
Gap (Transmissive Type)
Position and sensitivity
Adjustable
Head Open
Fixed
Paper End Sensor
Detect with I-mark sensor or Gap sensor
Label Near End
Fixed
*This feature is supported on products from serial number 6B~ and above.
Ribbon End/Ribbon Near End
Fixed
Dispenser
Fixed
•
If linerless cutter kit or dispenser unit is installed.
Fixed
•
If dispenser unit is installed.
Cutter
Fixed
•
If cutter unit or linerless cutter kit is installed.
Fixed
•
If cutter unit is installed.
•
Specifications are subject to change without notice.
