CL-NX Wireless LAN Interface – SATO Help Center

Applicable models: CL4NX/6NX

This interface complies with the IEEE802.11a/b/g/n/ac1 standard.

•

Before using wireless LAN near medical devices and facilities, consult your system administrator.

Basic Specifications

Protocol

•

STATUS3

•

STATUS4

•

STATUS5

IP Address

•

IPv4

•

IPv6

Subnet Mask / Prefix Length

•

IPv4

•

IPv6

Gateway Address

•

IPv4

•

IPv6

Data Transfer Method

802.11a

Max 54 Mbps

802.11n

Max 135 Mbps

802.11b

Max 11 Mbps

802.11g

Max 54 Mbps

802.11ac1

Max 390 Mbps

•

These are the theoretical values based on the wireless LAN specifications and are not the actual data transfer speeds.

Frequency Band

•

2.4 GHz (2.412 to 2.472 GHz)

•

5 GHz

Communication Channel

The number of channels you can set varies depending on the region where you use the product.

SSID

Any alphanumeric character (Maximum 32)

Authentication

•

Open System

•

Shared Key

•

WPA/WPA2

•

Perform the RADIUS server authentication using 802.1x (EAP-TLS, EAP-LEAP, EAP-TTLS, EAP-PEAP, EAP-FAST protocol)

Encryption

•

None

•

WEP (64 bits/128 bits)

•

TKIP (WPA-PSK, WPA-802.1x)

•

AES (WPA2-PSK, WPA2-802.1x)

Communication Mode

•

Infrastructure

•

Ad Hoc

¹ 802.11ac is supported on W-LAN2. The installed wireless module is displayed in [Wi-Fi Module] in the [Information] menu.

Software Specifications

Supported Protocol

TCP/IP

Network Layer

•

ICMP

Session Layer

•

TCP

Application Layer

•

LPD

•

FTP

•

HTTP/HTTPS

•

SNMP

•

DHCP

•

NTP

•

Specifications are subject to change without notice.

[02-02544-EN]