CL-NX [IPv6] – SATO Help Center

Set the IPv6 for the LAN.

•	After doing the settings, press thebutton to enable the new settings. Press thebutton to cancel the new settings and return to the previous settings.

•	You cannot change[IP Address],[Prefix Length],[Gateway], or[DNS]if[Mode]is anything other than[Static].

The setting items are as follows:

Select the IP address assignment method or disable IPv6.

DHCP/Renew Lease

Update the lease time and get the IP address from the DHCP server again.

◦	Appears only if you have selected[DHCP]in the[Mode]menu.

◦	Does not appear if the wireless LAN is the active interface.

Set and check the IP address.

If you have selected[DHCP]in the[Mode]menu, the screen shows the IP address you received from the DHCP server.

If you have selected[Static]in the[Mode]menu, select this to set the IP address.

Set and check the prefix.

Set and check the default gateway address.

If you have selected[DHCP]in the[Mode]menu, the screen shows the gateway address you received from the DHCP server.

If you have selected[Static]in the[Mode]menu, select this to set the default gateway address.

Set and check the address of the primary DNS server.

If you have selected[Static]in the[Mode]menu, select to set the primary address of the DNS server.

[03-01301-EN]