Skip to main content
Deutsch Español Français Bahasa Indonesia Italiano Nederlands Polski Português do Brasil ไทย Türkçe Tiếng Việt 简体中文

CL-NX [Ports]

Miho
Updated
Set the TCP/IP port number.
The setting items are as follows:
Port1
Set the port number of Port1.
For the two-port connection of Status4, this port is used for receiving print data. For the one-port connection of Status3/Status5, this port is used for both receiving print data and returning the product status.
Port2
Set the port number of Port2.
For the two-port connection of Status4, this port is used for returning the product status.
Port3
Set the port number of Port3.
For the one-port connection of Status3/Status4/Status5, this port is used for both receiving print data and returning the product status.
Flow Control
Set the communication protocol.
TCP Connection Queue
Set whether to allow queuing for connection when multiple hosts or applications are sending connection requests to the product.
Legacy Status for Port 9100
Set whether to change the return status format of Port3 to legacy status.
◦
Does not appear if you have selected[None]in the[Flow Control]menu.
 
ENQ Reply Delay
Set the period to delay status reply to status request ENQ.
◦
Not available if you have selected[Status4]in the[Flow Control]menu.
 
Status4 Cyclic Response
Set the interval for the cyclic status response.
◦
Available only if you have selected[Status4]in the[Flow Control]menu.
 
BCC
Set the BCC check function.
◦
Appears only if you have selected[Status5]in the[Flow Control]menu.
 
 
Roles of Port1 to Port3
In the socket server function of TCP/IP, either of the following connection methods can be used.
The ports to be used and their roles change depending on the connection method and communication protocol.
Two-port connection
Port1 is used for receiving print data, and Port2 is used for returning the product status.
Two-port connection is available when the communication protocol is Status4.
One-port connection
One port is used for both receiving print data and returning the product status.
When the communication protocol is Status4, Port3 is used.
When the communication protocol is Status3 or Status5, Port1 or Port3 is used.
[03-01356-EN]