CL-NX [IPv4] – SATO Help Center

Configure IPv4 for Wi-Fi.

•	After doing the settings, return to the[Wi-Fi]screen by pressing thebutton, and then press thebutton to enable the new settings. Press thebutton to cancel the new settings and return to the previous settings.

•	When[Wi-Fi Direct]is active,[Mode],[DHCP]and[DNS]do not appear. In addition, you cannot change[IP Address],[Netmask], or[Gateway]if[DHCP]or[Wi-Fi Direct]is active.[DNS]cannot be changed if[Mode]is[DHCP].

The setting items are as follows:

Select the IP address assignment method.

DHCP/Renew Lease

Update the lease time and get the IP address from the DHCP server again.

◦	Appears only if you have selected[DHCP]in the[Mode]menu.

◦	Does not appear if LAN is the active interface.

Set and check the IP address.

If you have selected[DHCP]in the[Mode]menu, the screen shows the IP address you received from the DHCP server.

If you have selected[Static]in the[Mode]menu, select to set the IP address.

Set and check the subnet mask address.

If you have selected[DHCP]in the[Mode]menu, the screen shows the subnet mask address you received from the DHCP server.

If you have selected[Static]in the[Mode]menu, select to set the subnet mask address.

Set and check the default gateway address.

If you have selected[DHCP]in the[Mode]menu, the screen shows the gateway address you received from the DHCP server.

If you have selected[Static]in the[Mode]menu, select to set the default gateway address.

Set and check DNS server addresses.

If you have selected[Static]in the[Mode]menu, select to set and check DNS server addresses.

[03-01312-EN]