CL-NX [Kanji Command]

Miho

15 May 2026 11:18 Updated

Applicable models: CL4NX/6NX

Set the product behavior when the received data includes the Kanji command ESC+K5, ESC+K6 or ESC+K7.

The options are as follows:

Enabled

Change the Kanji commands ESC+K5, ESC+K6 and ESC+K7 in the received data to the proper commands and print.

◦

ESC+K5: 16x16 dots Kanji in horizontal line with one-byte character

◦

ESC+K6: 24x24 dots Kanji in horizontal line with one-byte character

◦

ESC+K7: 22x22 dots Kanji in horizontal line

Disabled

Do not change the Kanji commands ESC+K5, ESC+K6 and ESC+K7 in the received data. The product behavior when it receives these commands is as follows:

◦

ESC+K5: Print with 40x40 dots Kanji in horizontal line.

◦

ESC+K6: A command error occurs and the data will not be printed.

◦

ESC+K7: A command error occurs and the data will not be printed.

[03-02415-EN]