1. Refer to steps 1 through 6 of the Loading Label with Dispenser to load the media.
2. Turn the head lock lever ① counterclockwise to lock the print head.
3. Press the feed roller and media sensor assembly ③ down until the feed lock latch ② is locked.
4. Push the media guide ④ lightly against the outermost edge of the media.
5. Close the top cover.
6. After loading the media and ribbon, perform a test print to make sure that the media is loaded correctly.
Refer to the Test Print Mode for details on how to perform a test print.
| When closing the top cover, be careful not to pinch your fingers |
[01-01260-EN]