- Ribbon supply spindle
Load the ribbon here. - Ribbon rewind spindle
This is the part that winds up the used ribbon. - Label top sensor
When the Label Waste Prevention function is enabled, this sensor detects the leading edge of the media and aligns the media to the print start position. - Platen roller (consumable part)
This part presses the media and print head together and feeds the media. - Head lock lever
Press this lever backward to open the head assembly to replace media, etc. - Media roll holder
Load the media roll here. - Media roll holder guide
Adjust to the width of the media being used. - Sticker
Shows information about the product, such as model name and serial number.
The 8-digit alphanumeric number to the right of "S/N" is the serial number. - Head Pressure Adjustment Dial(s)
Adjust the pressure balance of the print head according to the thickness and width of the media you are using.
For more information, refer to Adjusting the Head Pressure Balance. - Media Guide
Align the position of the media guide to the width of the media you are using. - Ribbon Roller
This is the part that feeds the ribbon. - Print head (consumable part)
This is the part that prints directly on the media or uses a ribbon. - Media sensor guide
Use to adjust the position of the media sensor.
For more information, see Adjusting the Position of the Media Sensor.
[01-03345-EN]