Click below tab and printer to see more details.
PW208NX
- Error Message 1001 (Machine Error)
- [Auto-calibration]
- Incorrect Print and Stop Position
- Cleaning the Product
- Error Message 1008 (Out of Paper)
- When an Error Message Appears
- Want to Improve the Print Quality
- Error Message 1007 (Cover Open)
- Cannot Communicate nor Output
- When You Are in Trouble
CT4-LX
- How to deal with error message 1035 (I-mark not found) error
- How to solve an error message 1008 (Out of Paper)
- Troubleshooting (When Using the Product)
- How to solve an error message 1028 (Gap not found)
- When an Error Message Appears
- Sensor Auto-Calibration is failed
- How to cancel a print job during printing at printer side.
- How to solve an error message 1017
- Cannot Communicate nor Output
- Problems with display
FX3-LX
- How to cancel a print job during printing at printer side.
- When an Error Message Appears
- Sensor Auto-Calibration is failed
- Error Message 1015 (Cutter Error)
- Cannot Communicate nor Output
- How to solve an error message 1028 (Gap not found)
- Cleaning the Product
- Problems with display
- How to adjust when the print position is not right
CL4NX /CL6NX
- How to solve an error message 1008 (Out of Paper)
- Troubleshooting (When Using the Product)
- Cleaning the Product
- How to solve an error message 1028 (Gap not found)
- Want to Improve the Print Quality
- When an Error Message Appears
- How to cancel a print job during printing at printer side.
- How to adjust when printing quality is not satisfactory
- How to adjust when a ribbon wrinkle happens after replacing a ribbon.
CL4NX Plus/CL6NX Plus
- How to solve an error message 1028 (Gap not found)
- When an Error Message Appears
- Troubleshooting (When Using the Product)
- How to improve a paper jam
- How to solve an error 1007 (Head open error)
- Sensor Auto-Calibration is failed
- How to solve an error message 1008 (Out of Paper)
- Print quality issue (vertical white line or partially not printed)
- Explanation of the icons displayed on the screen
S84-ex/S86-ex
- Loading the Ribbon
- Loading Label with Dispenser
- Loading Media without Using Dispenser
- Loading the Media
S84NX/S86NX
- When an Error Message Appears
- Troubleshooting (When Using the Product)
- Replacing the Print Head
- Print quality issue (vertical white line or partially not printed)
- Want to Improve the Print Quality
- Cleaning the Product
- How to solve an error 1007 (Head open error)
- How to solve an error message 1028 (Gap not found)
- Loading the Media
- How to solve an error message 1008 (Out of Paper)
- When You Are in Trouble
- Problems with display
PW208NX
- Searching from an Image of the Product
- Specifications
- Settings Mode
- Items Displayed in each Display Mode
- Platen Roller Replacement Timing
- Part Identification
- Adjusting the Product
CT4-LX
- Searching from an Image of the Product
- Status Icon
- Specifications
- How to check a Printhead resolution (dpi)
- Parts Identification (Internal View)
- Replacing Consumable Parts
- Adjusting the Product
- How to adjust a vertical printing position.
- Parts Identification (Front View)
- Parts Identification (Rear View)
FX3-LX
- How to adjust media stop position and media cut position
- Replacing Consumable Parts
- Specifications
- Adjusting the Product
- Searching from an Image of the Product
- Display and Operation of the Operator Panel
- Usable Media
- Parts Identification (Front View)
CL4NX /CL6NX
- How to check a Printhead resolution (dpi)
- Replacing the Print Head
- How to adjust when label stop position is not correct
- Searching from an Image of the Product
- Adjusting the Product
- Usable Media and Ribbon
- Specifications
- Replacing the Platen Roller
- Parts Identification for the Product (Internal View)
- How to respond to the Replace Print Head icon
CL4NX Plus/CL6NX Plus
- How to adjust when label stop position is not right
- Adjusting the Product
- Parts Identification for the Product（ Internal View ）
- Usable Media
- Searching from an Image of the Product
- Specifications
- Replacing the Print Head
- How to check a Printhead resolution (dpi)
- Replacing the Platen Roller
- Parts Identification for the Operator Panel
- Usable Media and Ribbon
- Parts Identification for the Product（Rear View）
- Parts Identification for the Product（Front View）
S84-ex/S86-ex
- Test Print Mode
- I-Mark Sensor Manual Calibration Procedure
- S84/86-ex GAP Sensor Manual Calibration Procedure
- Factory Mode/Counter information
- Interface Settings
- Interface Mode
- S84ex/86ex - Rotating the Operator Display Panel
- Parts Identification for the Product（Internal View）
- Interface Combination
- Interface Specifications
- Connecting the Interface Cable
- Interface Connections
- Parts Identification for the Product（Rear View）
- Parts Identification for the Product（Front View）
S84NX/S86NX
- Specifications
- Usable Media and Ribbon
- Parts Identification for the Operator Panel
- Parts Identification for the Product（ Internal View ）
- How to adjust when dispenser stop position is not right
- Want to Install a Printer Driver
- Parts Identification for the Product（ Front View ）
- Incorrect Print Position
- How to check a Printhead resolution (dpi)
- Replacing the Platen Roller
- Parts Identification for the Product（Rear View）
CT4-LX
- Initial Setup (Startup Guide)
- Various Settings of the Product
- How to change the operation sound (buzzer volume)
CL4NX /CL6NX
- Settings Mode Menus
- Before You Start
- Initial Setup ( Startup Guide )
- CLNX - Customizing the CLNX Splash Screens
- How to change the Print Mode
CL4NX Plus/CL6NX Plus
- Settings Mode Menus
- The Product's [Tools] Menu
- Before You Start
- Want to set up a Printer
- Initial Setup (Startup Guide)
- The Product's [System] Menu
- The Product's [ Applications ] Menu
- The Product's [ Interface ] Menu
- The Product's [Printing] Menu
- How to change the Print Mode
PW208NX
- An Error Occurs When Installing the Printer Driver
- Procedure for Connecting the Product to a Computer
- Installing the Printer Driver
CL4NX /CL6NX
- Connecting the Product to a Computer
- Want to Install a Printer Driver
- An Error Occurs When Installing the Printer Driver
LP 100R
- [11-01168-EN] What does remote management allow or do?
- What are the USB ports used for on the SATO LP 100R?
- Can I print using USB media to print files?
- What are the USB ports used for on the SATO LP 100R?
- Should I upgrade from the V3 to the LP100R Windows V4 PCL driver?
- Why do I have strange characters and voids in my PCL output?
- What is the advantage of the SATO LP 100R Windows V4 PCL driver?
- How do I send an emulation file to the LP 100R from Windows?
- How does the SATO LP 100R Windows V4 PCL driver differ from the V3?
- Can I print to an LP 100R from Windows servers or work stations?
If you cannot find the Model listed in above that you are using, please submit a request from Here.