PW4NX Searching by Function Names – SATO Help Center

Applicable model: PW4NX
Please refer to the below link.

Useful Functions

You can watch the videos to understand the procedures to load and replace media, to replace consumables, and to clean the product.

Test Print

You can print a factory test, the product setting information, or the results of what the media sensors detected.

Check Media Size

The product generates a media error when the sizes of the print data and loaded media are different.

Password

You can set a password to restrict product operations.

Show Total Count

The product can show the total print count on the Online/Offline screen.

Auto Power-Off

You can set the product to power off automatically when no operation is performed for a certain period of time.

Estimated Printable

Shows estimates of the remaining number of sheets that can be printed, based on the remaining battery power, the number of sheets output, and the battery consumption.

Print Control

Set print performance.

Product Operation Functions

Reprint

You can set the product to print the previous data again by pressing the

button (REPRINT) on the Online screen.

Start Online

You can set the product to start in Online mode when powering on the product.

Feed after Error

You can set the product to automatically feed the media when recovering from an error.

Feed at Power On

You can set the product to automatically feed the media when powering on the product.

Print Quality Improvement Functions

Head Check

The product can automatically check if there is a broken heating element in the print head.

Maintenance Functions

SOS (SATO Online Services) (SOS users only)

This is a remote maintenance service that monitors your product status 24 hours a day and supports stable operation of the product.

Notifications

You can check the counter of the print head or the platen roller, and set them to notify you when parts need to be cleaned or replaced.

Communication Function

NFC

The NFC interface of the product supports a handover function that simplifies the Bluetooth/Wi-Fi connection setup with Android devices.

Functions When Using Commands

Command Error

You can set the product to show SBPL command errors on the screen.

Non-Standard Code

You can switch between the protocol code settings of the product.

Prioritize

You can set whether to prioritize settings through the product or through commands.

Optional Functions

What You Can Do Using the USB Memory

You can get the product log data and setting information, and install certificates.

02-01772-EN